Confirm the machine interface
Send the controller label, wiring photos, and the action the machine must perform.
Papan kontrol industri
QL-PR-200 Pengendali Pulse & Relay
Papan kontrol machine-side untuk vending, coffee, laundry, dan peralatan self-service. Hubungkan API, 4G, atau serial ke sistem pembayaran dan backend Anda.
Pulse inputRelay outputTimed sessionSession result
Kesesuaian proyek
Untuk mesin dan proyek yang sesuai
Sinyal kebutuhan
- Claw machines and arcade equipment with a pulse or relay start.
- Laundry machines that need a timed relay or pulse sequence.
- Lockers and cabinets that accept a dry-contact unlock signal.
- Projects replacing coin modules with API or QR control.
Yang perlu dikirim
- Foto mesin atau papan saat ini
- Catatan interface atau wiring
- Aksi target setelah API atau pembayaran
- Apakah perlu upload data
Kurang cocok jika
- The machine has no pulse, relay, serial, or other controllable input.
- You need payment acquiring, settlement, or wallet balance.
- You need a guaranteed timing or compatibility result before a sample.
Model integrasi
Dari perintah API ke aksi mesin
Sistem pembayaran atau backend Anda mengirim perintah, QuLink menjalankan aksi mesin dan mengirim hasilnya. Interface dikonfirmasi pada sampel.
- Product model
- QL-PR-200
- Pulse input
- 4 channels; 5–24V opto-isolated
- Pulse output
- 4 channels; 20–1000 ms configurable
- Relay
- 4 channels; NO / NC / COM
- Relay rating
- 10A 250VAC / 10A 30VDC
- Power input
- 12–24V DC; 3A
- Communication
- RS485 / UART; RS232 optional
- Connectivity
- 4G LTE Cat.1 optional; Wi-Fi optional
- Offline storage
- 4 GB; up to 14 days
- Firmware
- Standard firmware; OTA update support
- Indicative sample price
- USD 129–199 for one sample; final quote after interface review
- Applications
- Claw machines, laundry, lockers, arcade, timed equipment
Alur kerja
Dari interface mesin ke hasil yang dikontrol API.
Map the command
Define the API command, machine action, result fields, timeout, and fault behavior.
Test one machine
Validate the command, machine action, result, and reconnect behavior on a sample.
Configure the rollout
Confirm connector, firmware, quantity, and support before production.
Contoh API
Contoh perintah server atau webhook untuk aksi machine-side.
Field perintah bergantung pada interface mesin, profil firmware, dan apakah pembayaran atau aplikasi Anda yang memicu aksi.
POST /v1/devices/CLAW-07/commands
{
"command": "pulse",
"channel": 1,
"count": 1,
"reference_id": "SESSION-2048"
}
Project RFQ
Ceritakan apa yang harus mesin lakukan, kirim, atau laporkan.
Kirim model mesin, foto controller, dan aksi yang dibutuhkan. Kami konfirmasi jalur interface Pengendali Pulse & Relay dan langkah uji sampel.
A good first message
If you are unsure about the exact interface, send what you have. Photos often answer more than a long spec.
- Machine type and target country
- Machine photo, board photo, or wiring photo
- Action after payment or API command
- Need data upload? expected quantity?
Fastest first step
- Send a machine photo
- Describe the action after API or payment
- Tell us if data upload is needed
FAQ
Pertanyaan yang biasanya muncul sebelum uji sampel.
Can it control a machine without MDB?
Yes. QL-PR-200 is for pulse, relay, or timed-start paths. The machine does not need an MDB cashless interface.
Can it count pulses from an existing coin mechanism?
Yes, where the pulse level and polarity match the input specification. Confirm the signal on a sample.
Does it support a timed session?
Yes. Relay duration and session behavior are configured per machine profile.
What should we send first?
Controller photos, pulse or relay wiring, power measurement, and the exact start/stop action.
Use case terkait